| This cartridge/ filter is NIOSH approved and provides the highest level of protection against oil and non-oil based particles. Use with 3M? Half and Full Face piece Respirators 6000 Series, Half Face piece Respirator 7500 Series and Full Face piece Respirator 7800 Series with bayonet filter holders.
When properly fitted, use in a variety of applications including welding, brazing torch cutting, metal pouring, soldering and exposure to lead, asbestos, cadmium, arsenic, MDA and HF for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half face pieces or 50 times PEL with full face pieces This filter also provides nuisance level* protection against OV and AG exposures. Full face pieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are Immediately Dangerous to Life or Health (IDLH).
*3M recommended for relief against nuisance levels of organic vapor and acid gases. Nuisance level organic vapor and acid gas refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH-approved for organic vapors or acid gases. Do not use for respiratory protection against organic vapors or acid gases (except hydrogen fluoride).
#tab1 {display:block ! important}
3m 7093 P100, has a hard, outer plastic casing to help protect the filter from raining and excessive humidity. It's commonly used in wet environments, such as asbestos abatement |
